TIRES > Heat Resistant Conveyor Belt
Hear Resistant Conveyor Belt.jpg
Hear Resistant Conveyor Belt.jpg
  • Hear Resistant Conveyor Belt.jpg
    • 1

Heat Resistant Conveyor Belt

Heat resistant conveyor belt adopts SBR or EPDM asconveying layer,special high temperature resistantcanvas as carcass materials, not only solving thefabric shrinkage and deformation problems under theenvironment of high temperature, but also avoidingcrucial problem as high degree of saturation ofethylene propylene rubber, poor adhesion. It is lightelof long lifespar(about 2-4 times ) and good perfor-mance of heat resistance.
CharacterizationSizeTemperature Of Materials CarriedBelt Surfac Temperature Temperatura
Coke100-200mm(4-8inch)70-100℃50-60℃
CementPower/Polvo200-250℃80-90℃
ClinkerLa10-30mm(0.4-1.2inch)100-220℃100-110℃
Molding-200-250℃80-90℃
Metal Powder-120℃120-130℃
Raw Material(30mm(1.2inch))180-220℃100-120℃
Sintered Ore25-200mm(1-8inch)200-400℃130-150℃
Return Of Sintered Ore(10mm(0.4inch))260℃180-200℃


Physical property indexesExecution standard:GB/T20021-2005
ItemTest temperature
≤ 125°C≤ 150°C≤ 200°C(EPDM)≤ 300C(EPDM)
Change range allowed
HardnessThe difference between the formerafter the aging+20±20±20±20
The maximum value after aging85
858585
The tensile strengthThe performance rate/%-30-40-40-40
After aging the lowest Mpa10
555
Tensile elongationAfter aging rate/%-50-55-55-55
After aging the lowest /%200180180180


Belt Type Material

Fabric Typ

Single Fabric

Strength(N/mm)

Single Fabric

Thickness(mm)

Cover Thickness(mm)

No.Of PlyBelt Width

Range(mm)

Belt Length(m)Roll
TopBottom

Nylon(NN) Belt/

NN1001001
2-25
0-102-10300-22002-650
NN1251251.05
NN1501501.1
NN2002001.2
NN2502501.4
NN3003001.6
NN4004002.2

Polyester Belt/

EP10010012-250-102-8300-22002-650
EP1251251.05
EP1501501.1
EP1601751.15
EP2002001.2
EP2502501.4
EP3003001.6
EP3503501.8
EP4004002.2
Cotton Belt/CC-56
561.102-250-103-12
300-22002-50


Design CodeDIN22102 refCharacterizationTensile in MpaElongation in %Abrasion in mm³Hardness in SHA
HS EPYY
High Abrasion Resistance≥20≥400≤15060±5
HS EPXXResistance to Cutting≥25
≥450≤12060±5
HS EPWWExtra Abrasion Resistance≥18≥450≤9060±5
HS EPZZAbrasion Resistance≥15≥350≤25060±5
HS EPKYK,YFlame retardant≥20≥400≤15060±5
HS EPSYS,YFlame retardant≥20≥400≤15060±5
HS EPKKFlame retardant≥15≥350
≤15060±5
HS EPSSFlame retardant≥15≥350≤15060±5
Design CodeDIN22102 ref

Cover Properties of Special

Characterization

EP conveyor belt

Tensile in Mpa

Elongation in %Abrasion in mm³Base material
HS EPORG
Oil Resistant -30 °C ~+125°C≥15≥400≤200NBR
HS EPACA,CChemical Resistant -30 °C ~+125*C≥15≥400≤250CR/IIR
HS EPTT1/T2/T3/T4Heat Resistant +100 °C ~+300°C≥15≥400≤200SBR/EPDM
HS EPGSGSFlame Retardant & Oil Resistant -15℃~+125℃≥15≥400≤250NBR/CR


Previous: Multi-ply Fabric Conveyor Belt
Next: Fire Resistant Conveyor Belt
Return